 |
The “PRECISION” Right Angle Gear Drive provides the most economical efficient, and positive power transmission from Horizontal mover to Vertical pump shaft. The gear drive eliminates long quarter turn belts, which are not only expensive to install, operate and maintain, but are considerably less efficient, are affected by climatic conditions and require large floor space. |
 |
   |
| |
HOME | CONTACT US | SITE MAP |
|
| FEATURED PRODUCTS |
|
| |
| |
Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits |
| |
|
Drilling Today Here |
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011
Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166 |
|
|
| |
 |
| Home | Products | Contact Us |
|
|
| |
|
| APPLICATIONS |
| |
|
| |
The “PRECISION” Right Angle Gear Drive provides the most economical efficient, and positive power transmission from Horizontal mover to Vertical pump shaft. The gear drive eliminates long quarter turn belts, which are not only expensive to install, operate and maintain, but are considerably less efficient, are affected by climatic conditions and require large floor space.
The “PRECISION” Right Gear Drive is used in pumping like irrigation, Municipal supply and sewage disposal, fire and flood protection, cooling towers and marine services.
The “PRECISION” Right Angle Gear Drive manufactured in a variety of models to meet specific requirements of high and slow speed prime movers and pumps having wide range of size and type. |
| |
|
|
| SPECIFICATIONS OF Precision BRAND |
| |
|
| |
The Right Angle Gear Head comprises of a pair of Bevel gears, right angle to each other mounted with suitable bearings fitted in a C.I. Chamber and bearing housings, manufactured from closed grained C.I. confirming to Grade 20 ISI 210.
GEARS:
Spiral Bevel Gears are used to ensure smooth and silent operation. They are made out of special Alloy Steel. Lapped and case hardened Gears are adjustable to achieve best possible tooth contact, and transmission effiency 97% to 99%.
BEARINGS:
Double row angular contact thrust bearings and ball bearing are provided at the top and bottom of the vertical hollow shaft respectively, and they are capable to take complete hydraulic down thrust. The horizontal driving shaft is mounted on double row angular contact thrust bearing and ball bearing to take thrust load of gears and driving arrangement.
SHAFT
Vertical hollow shaft and horizontal driving shaft are designed to transmit the rated power and adopt top shaft of pump and driving arrangement of pulleys of universal joint shaft respectively
LUBRICATION
The Oil pump, provided in the oil bath lubricates ball bearings and gears.
COOLING
Lubricating oil is cooled by pumping water flowing through the cooling coil.
‘PRECISION’ Right Angle Gear Heads are manufactured with speed ratios 1:1, 1:2, 2:1 and other ratios on request. They can be mounted easily on discharge heads of Turbine Pumps manufactured as per ISS 1710:1972. |
| |
|
|
|
|
| |
|
| |
|
|
|
| Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved. |
| |
|
|
|
|
