 |
Manufacturers Exporters and Suppliers of DTH 4-100 D/E, Diesel & electric Driven, Dth Drilling Rigs, Tractor Mounted Dth Drilling Rigs, Trolley Mounted Dth Drilling Rigs, Skid Mounted Dth Drilling Rigs, Dth Rotary Drilling Rigs, Trailer Mounted Dth Drilling Rigs, Mini Dth Drilling Rigs, Hydraulic Dth Drilling Rigs, Hand Pump Dth Drilling Rigs, Water Well Dth Drilling Rigs, Dth Combination Drilling Rigs. |
 |
   |
| |
HOME | CONTACT US | SITE MAP |
|
| FEATURED PRODUCTS |
|
| |
| |
Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits |
| |
|
Drilling Today Here |
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011
Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166 |
|
|
| |
 |
| Home | Products | Contact Us |
|
|
| DTH 4-100 D/E, Diesel & electric Driven |
|
 |
|
| |
|
| RATED CAPACITY: |
| |
|
| |
Upto 100/115mm to a depth of 30 mtrs. (100 ft.) |
| |
|
|
| ANGLE HOLE DRILLING (OPTIONAL): |
| |
|
| |
Drill can be fitted for angle drilling to drill 0-25 Degrees in step of 5 Degrees. |
| |
|
|
| PULL DOWN PRESSURE: |
| |
|
| |
Variable to 7,500 Kgs (16560 lbs) through hydraulic cylinder. |
| |
|
|
| AIR COMPRESSOR: |
| |
|
| |
10.3 m3/min at 7 kg/cm2 (365 CFM / 100 PSI) rotary vane type compressor. |
| |
|
|
| ROTATION HEAD: |
| |
|
| |
Hydraulic top drive head, variable speed 0 to 100 RPM Torque 300 kg.mt. (2172ft. lbs) |
| |
|
|
| POWER UNIT: |
| |
|
| |
Single Diesel Engine driven developing around 170 H.P. for driving compressor and hydraulic system through power take off arrangement. |
| |
|
|
| MOUNTING: |
| |
|
| |
Individual crawler track control gives full maneuverability on narrow benches. Pads are 16" wide triple grouser. |
| |
|
|
| LEVELLING JACKS: |
| |
|
| |
4 Nos. Hydraulic leveling jacks individually controlled. |
| |
|
|
| MAST: |
| |
|
| |
6.7 M. High (22 ft.).Electrically welder tubular construction suitable for 4.5M (15 Ft.) long drill rod. |
| |
|
|
| DRILL RODS: |
| |
|
| |
73mm / 76mm x 4.5 mtrs (15 Ft.) long drill rod with 23/8" API REG. Box and pin connection (OTHER SIZES AVAILABLE ON REQUEST) |
| |
|
|
| ROD CHANGER: |
| |
|
| |
Pivoted rod changer can carry 5 Nos. of 4.5 mtrs. (15 Ft.) long drill rods in a rotary fixture. |
| |
|
|
| BREAK OUT WRENCH: |
| |
|
| |
Break out wrench positioned hydraulically from the cab. |
| |
|
|
| HYDRAULIC SYSTEM: |
| |
|
| |
Three individual circuits. Total oil displacement 58 GPM (219 LPM) maximum pressure 140 kg/cm2 (2000 PSI) |
| |
|
|
| DUST COLLECTOR: |
| |
|
| |
The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series). |
| |
|
|
| CONTROL: |
| |
|
| |
The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series). |
| |
|
|
| OPTIONALS : |
| |
|
| |
Choice of compressor, |
| |
Twin diesel engine, one for air compressor and other for hydraulic system. |
| |
Single electric motor. |
| |
Night lighting arrangement. |
| |
Air line lubricator. |
| |
Water Injection System |
| |
Twin electric motor, one for air compressor and other for hydraulic system. |
| |
PC Based Data Logger. |
| |
|
| |
Dimensions
| |
In meters |
| A |
9.08 |
| B |
2.8 |
| C |
3.6 |
| D |
8.45 |
| E |
2.7 |
| F |
1.05 |
| G |
3.2 |
| H |
- |
|
|
|
|
| |
|
| |
|
|
|
| Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved. |
| |
|
|
|
|
