 |
Manufacturers Exporters and Suppliers of DTH 4-100 DT, Dth Drilling Rigs, Tractor Mounted Dth Drilling Rigs, Trolley Mounted Dth Drilling Rigs, Skid Mounted Dth Drilling Rigs, Dth Rotary Drilling Rigs, Trailer Mounted Dth Drilling Rigs, Mini Dth Drilling Rigs, Hydraulic Dth Drilling Rigs, Hand Pump Dth Drilling Rigs, Water Well Dth Drilling Rigs, Dth Combination Drilling Rigs. |
 |
   |
| |
HOME | CONTACT US | SITE MAP |
|
| FEATURED PRODUCTS |
|
| |
| |
Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits |
| |
|
Drilling Today Here |
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011
Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166 |
|
|
| |
 |
| Home | Products | Contact Us |
|
|
 |
|
| |
|
| MAKE & MODEL: |
| |
|
| |
"PRECISION" Model DTH-4-100DT Hydraulic operated Crawler mounted Tow Hole Drill. |
| |
|
|
RATED CAPACITY: |
| |
|
| |
4" [100mm] to 4.1/2" [115mm] dia. Holes using 2.7/8" [73mm] OD Drill Pipes 30 meters depth. |
| |
|
|
PULL DOWN / PULL UP: |
| |
|
| |
Hydraulic motor driven chain pull down system with a provision of micro feed arrangement. |
| |
|
|
ROTARY DRIVE SYSTEM: |
| |
|
| |
Top drive hydraulic speed 0 to 60 RPM infinitely variable and constant torque of 7000 in.lbs [80 Kg.Mtrs.] |
| |
|
|
MOUNTING: |
| |
|
| |
Heavy duty crawler driven by independent hydraulic motors. Grade ability 1 in 10. Travel speed 1.5 KMPH. The drill can tow a portable compressor. |
| |
|
|
MAST: |
| |
|
| |
Electrically welded heavy duty structural steel suitable to handle 10 Feet [3 Mtrs.] long drill pipes. Mast can be raised and lowered by hydraulic cylinder. The boom can operate : |
| |
|
| |
Above horizontal - 45 degrees |
| |
Below horizontal - 20 degrees |
| |
Mast dump - 120 degrees |
| |
|
|
DRILL ROD: |
| |
|
| |
2.7/8" [73mm] OD x 10 Ft. [3 Mtrs.] long. |
| |
|
|
AIR LINE LUBRICATOR: |
|
BREAKOUT SYSTEM: |
|
HYDRAULIC SYSTEM: |
| |
|
| |
The hydraulic system includes motor, pumps, valves, piping, reservoir, etc. Laid out on the deck itself. |
| |
|
|
LEVELLING JACKS |
| |
|
| |
4 Nos. Hydraulic leveling jacks with safety check valves provided. |
| |
|
|
RECOMMENDED AIR COMPRESSOR: |
| |
|
| |
250 / 300 CFM - 100 PSI Compressor for driving all air motors and flushing operation |
| |
|
|
|
|
| |
|
| |
|
|
|
| Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved. |
| |
|
|
|
|
