 |
Manufacturers Exporters and Suppliers of DTH/Rotary Drill Rig, Dth Drilling Rigs, Tractor Mounted Dth Drilling Rigs, Trolley Mounted Dth Drilling Rigs, Skid Mounted Dth Drilling Rigs, Dth Rotary Drilling Rigs, Trailer Mounted Dth Drilling Rigs, Mini Dth Drilling Rigs, Hydraulic Dth Drilling Rigs, Hand Pump Dth Drilling Rigs, Water Well Dth Drilling Rigs, Dth Combination Drilling Rigs. |
 |
   |
| |
HOME | CONTACT US | SITE MAP |
|
| FEATURED PRODUCTS |
|
| |
| |
Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits |
| |
|
Drilling Today Here |
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011
Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166 |
|
|
| |
 |
| Home | Products | Contact Us |
|
|
| KLR 400 Meters DTH/Rotary Drill Rigs |
|
Technical Specifications of KLR 400 Meters
DTH/Rotary Drill Rig |
| Descriptions |
Units |
|
F.P.S. |
Metric |
| Drill Hole Size |
6.5 inch |
165 mm |
| Drill Rod Size |
4.5 inch |
114 mm |
Max. Depth
(Under favourable drilling
conditions) |
1312 feet |
400 mtrs. |
| Mast |
| Centraliser Opening |
16 ft. |
406 mm |
| R.H. Travel |
23 feet |
6900 mm |
| Rotary Head |
| Max. Speed |
0-125 rpm |
0-125 rpm |
| Max. Torque |
44000 inch-lbs |
506 kgf.m |
| Drive Motor Type |
Orbit Motors |
Orbit Motors |
| Type of Lubrication |
Forced Lubrication |
Forced Lubrication |
| Feed System |
| Pull Back Capacity |
31020 lbf. |
14074 kgf. |
| Pull Down Capacity |
21551 lbf. |
9621 kgf. |
| Pull Back Speed |
164 fpm. |
50 mtr/min. |
| Hydraulic System |
| Max. Operating Pressure |
3500 psi |
210 bar |
| Filtration (Nom), Return |
25 Microns |
25 Microns |
| Tank Capacity (Open loop) |
172 gallons |
650 litres |
| Prime Mover |
| Engine Power |
180 HP @ 2400 rpm |
180 HP @ 2400 rpm |
| Auxiliary System Water Injection Pump |
| Max. Pressure |
600 psi. |
42 bar |
| Max. Flow |
26.4 gpm. |
100 lpm. |
| Type of drive |
Hydraulic |
Hydraulic |
| Water Tank Capacity |
70 gallons |
300 litres |
| Jacks |
| Type |
Hydraulically actuated |
Hydraulically actuated |
| Cylinder Bore |
5 inch |
127 mm. |
| Stroke |
24 inch |
610 mm. |
| Quantity |
4 |
4 |
| Breakout Wrench |
| Actuation Type |
Hydraulic |
Hydraulic |
| Cylinder Stroke |
20 Inch |
500 mm. |
| Hydraulic Oil Cooler |
| Type |
Fin type, oil to air |
Fin type, oil to air |
| Drive |
Hydraulic |
Hydraulic |
| Oil Flow Capacity |
85 gpm. |
322 gpm. |
| Winch |
| Winch Bare Drum Pull |
881.6 lbf |
400 kgf |
| Wire Rope Dia |
0.375 inch |
9.5 mm. |
| Diesel Tank |
| Capacity |
79.3 Gallons |
300 Litres |
|
| |
|
| |
|
|
|
|
| |
| Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved. |
| |
|
|
|
|