 |
Manufacturers Exporters and Suppliers of KLR 300 DTH/Rotary Drill Rig, Dth Drilling Rigs, Tractor Mounted Dth Drilling Rigs, Trolley Mounted Dth Drilling Rigs, Skid Mounted Dth Drilling Rigs, Dth Rotary Drilling Rigs, Trailer Mounted Dth Drilling Rigs, Mini Dth Drilling Rigs, Hydraulic Dth Drilling Rigs, Hand Pump Dth Drilling Rigs, Water Well Dth Drilling Rigs, Dth Combination Drilling Rigs. |
 |
   |
| |
HOME | CONTACT US | SITE MAP |
|
| FEATURED PRODUCTS |
|
| |
| |
Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits |
| |
|
Drilling Today Here |
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011
Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166 |
|
|
| |
 |
| Home | Products | Contact Us |
|
|
| KLR 300 DTH/Rotary Drill Rig |
|
| Technical Specifications of KLR 300 Meters
DTH/Rotary Drill Rig |
| Descriptions |
Units |
| |
F.P.S. |
Metric |
| Drill Hole Size |
10.0 inch |
254 mm. |
| Max. Reaming Size (insteps) |
16.0 inch |
406 mm. |
| Drill Rod Size |
4.5 inch |
114 mm. |
Max. Depth
(Under favourable drilling
conditions) |
984 feet |
300 mtrs. |
| Mast |
| Centraliser Opening |
20 inch. |
508 mm. |
| R.H. Travel |
23 ft. |
7100 mm. |
| Rotary Head |
| Max. Speed (Series) |
0-100 rpm. |
0-100 rpm. |
| Max. Torque (Parallel) |
45000 inch-lbs |
518 kgf.m. |
| Drive Motor Type |
Orbit Motors |
Orbit Motors |
Type of Lubrication
Rotary Head
will move out of centerline for lifting (Manual) |
Forced Lubrication |
Forced Lubrication |
| Feed System |
| Pull
Back Capacity |
26588 lbf. |
12064 kgf. |
| Pull
Down Capacity |
18473 lbf. |
8247 kgf. |
| Pull Back Speed |
82 fpm. |
25 mtr/min. |
| Hydraulic System |
| Max.
Operating Pressure |
2571 psi. |
180 bar |
| Filtration (Nom), Return |
10 Microns |
10 Microns |
| Tank
Capacity |
145 gallons |
550 litres |
| Hydraulic Oil Cooler |
Fin Type Oil to Air |
Fin |
| Type
Oil to Air |
|
|
| Prime Mover |
| Input Drive |
Driven by a truck engine 160 hp. |
Driven by a truck engine 160 hp. |
| Auxiliary System Water Injection Pump |
| Max.
Pressure |
600 psi. |
42 bar |
| Max.
Flow |
12 gpm. |
47 lpm. |
| Type of drive |
Hydraulic |
Hydraulic |
| Jacks |
| Cylinder Bore |
5 inch |
125 mm. |
| Stroke |
24 inch |
610 mm. |
Quantity
(System Consists of
Reverse Flow restricted Valves) |
4 |
4 |
| Breakout Wrench |
| Actuation Type |
Hydraulic |
Hydraulic |
| Cylinder Stroke |
24 Inch |
600 mm. |
| Auxiliary Winch |
| Bare drum Pull |
1763 lbf. |
800 kgf. |
| Max. Speed |
66 fpm. |
20 m/min. |
| Drive |
Hydraulic |
Hydraulic |
| Mud Pump |
| Bore |
6 inch |
152 mm. |
| Stroke |
6 inch |
152 mm. |
| Max.
Flow |
270 gpm. |
1021 lpm. |
| Max.
Pressure |
213 psi. |
15 bar |
| Drive |
Hydraulic |
Hydraulic |
|
| |
|
| |
|
|
|
|
| |
| Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved. |
| |
|
|
|
|