Drilling Today

Manufacturers Exporters and Suppliers of Hydra-Drills, Dth Drilling Rigs, Tractor Mounted Dth Drilling Rigs, Trolley Mounted Dth Drilling Rigs, Skid Mounted Dth Drilling Rigs, Dth Rotary Drilling Rigs, Trailer Mounted Dth Drilling Rigs, Mini Dth Drilling Rigs, Hydraulic Dth Drilling Rigs, Hand Pump Dth Drilling Rigs, Water Well Dth Drilling Rigs, Dth Combination Drilling Rigs.

Dth Rotary Drilling Rigs for sale Trailer Mounted Dth Drilling Rigs for saleMini Dth Drilling Rigs for saleHydraulic Dth Drilling Rigs for sale
Hand Pump Dth Drilling Rigs for sale
Water Well Dth Drilling Rigs for sale
Dth Combination Drilling Rigs for sale

Dth Drilling Rigs
Rotary Drilling Rigs
Combination Drilling Rigs
Dth Cum Rotary Drilling Rigs
Blast Hole Drilling Rigs
Core Drilling Rigs
Wagon Drills
Tractor Mounted Drilling Rigs
Reverce Circulation drilling Rigs
Inwell Drilling Rigs
Trailer Mounted Drill Rig
Self Propelled Skid Mounted Rig
Diamond Core Drilling Rig
Mini Truck Mounted Drilling Rig
Hydro Facturing Equipments
Auto Loader DTH Drilling Rig
Hand Pump Drilling Rigs
Trolley Mounted Drill Rigs
Portable Drilling Rigs
Crawler Mounted Down the Hole
Water Well Drilling Rig
Hydraulic Down the Hole, Drilling Rig
Horizontal Drilling Rigs
Dual Rotary Drilling Rigs
Hydra Drills
Auger Drills
Soil Investigation Drilling Rigs
Foundation Drilling Rigs
Geothermal Drilling Rigs


Drilling Today Market Place for - Water Well Drilling Rigs, Dth Drilling Rigs, Rotary Drilling Rigs, Dth Hammers, Button Bits, Upvc Casing Pipes, Mud Pump, Drill Rods, Hydraulic Pumps, Rock Well Hoses, Down the Hole Drilling rigs, Hydraulic Drilling Rigs, Combination Drilling Rigs, Mud Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Blast Hole Drilling Rigs, Down the Hole Hammers Drill Bits Dth Hammers , Carbide Button Bits, Drag Bits, Pdc Drilling Bits, Diamond Bits


Drilling Today Here
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011 Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166

Manufacturers and Exporters of Water Well Drills
Hydra-Drill Products
Hydra- Drill Accessories
Augers & Drills
Frequent Questions
Frequently Asked Questions

Q. What is the DeepRock Hydra Drill?

A. The Hydra Drill is the most light-weight, highly portable and lowest cost water well drilling system on the market today. (Back to top)

Q. How does it work?

A. The Hydra Drill is a small top-head rotary drilling rig powered by a 4 or 6HP gasoline powerhead and 3 or 5HP gasoline Recirculating Pump (Mud Pump).

The Hydra Drill uses the method of drilling referred to as "Mud Rotary" drilling.

The powerhead engine turns the Drill Stem which has a Drill Bit screwed onto the end.

As the Drill Bit drills down into the earth, the Mud Pump recirculates a Drilling Fluid down the Drill Stem and out the Drill Bit. This Drilling Fluid is pushed up the bore-hole and flows into a Mud Pit.

The Mud Pit is a simple pit dug into the ground or made of some type of container for the purpose of settling the heavier cutting from the Drilling Fluid. The Drilling Fluid is made up of plain water mixed with Drilling Additives.

The two common types of Drilling Additives are Quick Gel and EZ Mud. Quick Gel is a finely powdered bentonite clay and EZ Mud is a liquid polymer. It is highly recommended that you always use these Drilling Additives and both are available from DeepRock.

After the cuttings (soil, sand, clays, etc. that are flushed up out of the bore-hole) flow into the Mud Pit, the heavier cutting settles out of the Drilling Fluid and the Mud Pump pumps the Drilling Fluid back down into the Bore-hole to repeat this process. The Mud Rotary method of drilling is very common and is the same drilling method that the oil drilling rigs use.(Back to top)

Q. Is it hard to drill with the Hydra Drill?

A. The drilling process is simple. Anyone who can operate any type of outdoor power equipment can drill with the Hydra Drill. One person can drill with the Hydra Drill, but a 2-3 person drilling crew is better. Complete drilling instructions are included with each Hydra Drill and our Customer Service Department is only a Toll-Free telephone call away.(Back to top)

Q. How deep will it drill?

A. We have Hydra drill packages that will drill to depths of 300 feet or 90 meters. Water is found at less that 300 feet in most places in the world.(Back to top)

Q. What diameter will it drill?

A. The smaller Hydra Drill packages will drill a 4 inch (100mm) bore-hole designed for 2 inch (50mm) well casing. The larger packages will drill up to an 8 inch (203mm) bore-hole for 6 inch casing. The "rule of thumb" is to drill a 2 inch larger diameter bore-hole than the diameter casing you plan to use.(Back to top)

Q. Where should I drill?

A. This is a very common question. You want to drill down into a naturally occurring aquifer. A aquifer is simply a formation of highly porous material, usually coarse sand and gravel, sometimes fractured rock, that is saturated with pure water. This water usually enters the aquifer at a higher elevation from rainfall or snow melt that perculates downward, until it reaches the aquifer. It then moves through the aquifer laterally at a slow rate of speed. These aquifers extend hundreds or even thousands of miles. These aquifers occur at reasonable depths almost everywhere in the world. Contrary to popular belief, a aquifer is NOT a narrow "underground" river, where is it is necessary to drill at a very specific site. The best place to drill is the most convenient location for your well.(Back to top)

Q. How deep will I have to drill?

A. These aquifers usually are found at less than 300 feet. The best indication of the depth of the aquifer in your area is the depths of existing wells of your neighbors . If you have neighbors who have drilled wells, it is very likely you will find water in the same depth range. Remember though, that if the well was commercially drilled, it is common for the commercial driller to have drilled deeper than was really necessary because they are usually paid per foot.(Back to top)

Q. How will I know when I have hit water?

A. Most water-bearing formations, known as an aquifer, is simply a formation of coarse sand and gravel. This type formation is very porous and is saturated with water. One of the best ways to determine when you hit water is to check the cutting being flushed out ofthe bore-hole while drilling. When coarse sand and gravel is being flushed up, it is an excellent chance you are in water or very close. Another thing to watch for is a marked decrease in the temperature of the drilling fluid as it flows out of the bore-hole. An aquifer is a constant 63-65 degrees and this ground-water will mix with the drilling fluid and lower the temperature. The drilling fluid also could become much thinner and sometimes you will lose circulation when you hit water.
(Back to top)

Q. Will it drill rock?

A. The Hydra Drill is a light-weight drilling rig and will perform best in favorable drilling conditions such as normal soils and clays. The more heavy duty Hydra Drill packages will handle many types of rock well. Many types of rock, such as sandstone or shale can be drilled fairly quickly. Harder types of rocks will result in a slow drilling speed, but we have some special bits that are recommended to drill harder rock. If the rock is extremely hard and a substantial depth is required to be drilled, then the Hydra Drill may not be feasible.
(Back to top)

Q. Why should I buy the Hydra Drill instead of having the well commercially drilled?

A. Good question! It is our experience that in many parts of the country, the cost of having just one well drilled costs more than the Hydra Drill! Remember, the Hydra Drill will drill many wells and the purchase cost can be spread over several wells or over several years. Even if one well is drilled, you still have the Hydra Drill to sell or rent to your neighbors. It is not unusual to recoup 65-75% of the purchase price on the used market.(Back to top)

Q. Is it legal for me drill on my own property?

A. In most areas the restrictions that apply to professional drillers DO NOT apply to someone who wants to simply drill a well on his own property for their own use: Many areas have what is know as Homeowners Exemption, which allow people to drill on their own property. If this question is a concern, we recommend you check with your local authorities. We also recommend you be sure they understand that you plan to drill only on your own property and do not plan to drill on a commercial basis.(Back to top)

Q. Should I have the water tested?

A. We recommend you have the water tested. In most cases, if the water is pumped from a natural aquifer, it is pure, drinkable water, but have it tested to make sure.(Back to top)

Terms and Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.